Limited offer till end of stock!!!
Brand new modules from Marmitek and Powerhouse, LOWEST prices on the market! |
 |
LM 12 |
Dimmer Plug-In Module.
ON/OFF and dimmer control of incandescent lighting from 40 to 300W. |
25.00 |
 |
AM
12 |
Switch Plug-In Module.
ON/OFF function to control any appliance,fluorescent or low energy lamps up to 10A.
|
25.00 |
 |
LM12W |
Wired Dimmer Module.
ON/OFF and dimmer control of incandescent lighting from 40 to 300W.
This small wired module can be fitted inside an appliance, on a junction box, in a false ceiling etc...
when no wall outlet is available or not prefered. |
25.00 |
 |
AM12W |
Wired Switch Module.
ON/OFF function to control any appliance,fluorescent or low energy lamps up to 10A.
This small wired module can be fitted inside an appliance, on a junction box, in a false ceiling etc...
when no wall outlet is available or not prefered.
|
25.00 |
 |
TM
12 |
RF Receiver + Switch Plug-In Module.
RF receiver module, receives signals from wireless devices (HR10 remote, MS13 etc..)
and sends these over the mains to all other X10 modules.
Can also control an appliance similar to the AM12.
|
34.00 |
 |
CM 11
|
Computer Interface.
Control X-10 Home Automation modules with a PC.
|
50.00 |
 |
LW 10 |
Wall-Mounted Dimmer.
Replaces any normal switch or dimmer for X-10 control of lighting circuits rated between
60W and 500W. The wall-mounted dimmer simply replaces the normal switch or dimmer.
Additional momentary switches can be connected. |
50.00 |
 |
AW 10
|
Wall-Mounted Switch.
Replaces any normal switch for X-10 control of lighting (including fluorescent)
up to 1000W or appliances such as heater/fans etc. rated up to 10A.
It simply replaces the normal light switch.
Additional momentary switches can be connected. |
50.00 |
 |
XM 10e |
Two way PLC interface.
The 2 way interface allows OEM products to receive and transmit X10 data on the mains
and thus enables you to design your own X10 compatible products. |
44.00 |
 |
TW 7223
|
Two way PLC interface.
The 2 way interface allows OEM products to receive and transmit X10 data on the mains
and thus enables you to design your own X10 compatible products. |
40.00 |
 |
UM 7206 |
Universal Module.
The Universal remote contains an isolated contact relay and a piezo beeper. It can be set to operate
as a beeper only, as an isolated contact relay only or both.
It can be set for momentary (pulse) or continuous (toggle) operation for the sound
and/or isolated contact relay. |
45.00 |
 |
TW serial
|
RS232 to Two way interface converter.
If you want to develop software for X10 control and don’t want to be bothered
with the complexities of the Two way hardware and timing, get this unit. The circuitry
neatly packed into the RS232 serial port connector converts the complex timing and
critical coding of the Two way interfaces into simple Ascii strings at 2400 baud. |
25.00 |
|
|
|
Click here to place an order: ORDER
Use this link if you need more information: Info request
| |
|