Circular foundations
These are fitted recessed into the deck or tank top and should be welded flush with the deck plates. Iso foundations
This fitting is recessed into the deck and are supplied as a single, double transversal, double longitudinal or a quadruple iso deck fitting, and when fitted should be welded flush with the deck. Lashing pot
These are recessed into the deck and supplied as a single, double or triple lashing point, and when fitted should lie flush. Stowage plates
These are recessed into the tank top deck and are supplied as a single, double transversal, double longitudinal or quadruple.
Raised Fittings:
Stowage plates
These are slightly raised and can be supplied with different heights. They can be welded (fitted) to hatch covers, tank tops or on decks. Iso deck sockets
These are welded on hatch covers and are standard 110mm in height.Other height available on request. U-Frame 45°
Sometimes referred as Dovetail foundations welded to weather deck, hatch covers and stanchion. Supplied as single, double, etc. It accepts bottom twistlocks 45°.
U-Frame 55°
Basically the same as The U-Frames 45° only stronger. BL welded to weather deck, hatch covers and stanchion. Supplied as single, double, etc. It accepts bottom twistlocks 55°.
Lashing tools:
Actuator poles
Alluminium in costruction and length to custom requirements.Designed actuator head to open close Twistlocks and semiautomatic twistlocks.
Locking Pins
Coupled to u-frames cones, locking cone when container is lowered into position also bottm cones operated by locking pins.
Plugs
Used for Plugging iso hole in deck fittings can be supplied in rubber or plastic, thus preventing sea water to fill the hole and eventual corrosion.
Spanner for turnbucke
Used to lock unlock Bridgefittings turnbucklese and hopen house turnbuckle.
Loose container securing devices
Bottom stacker
Used in the holds fit in the container corner castings.
Breech base twistlock
Fit in the breech base deck fitting.
Bridgefitting
Two locking nuts available 30 and 50 mm bridgefittings are used to lock togheter the top containers of adjacent stacks.
intermediate pressure support
fitted between the container and hatchcoaming they stabilize the container stack
